Custom Rubber Gasket Products

custom gaskets


1875 Lone Eagle St.

Columbus, OH 43228

1722 1st Street NE.

Massillon, OH 44646

Ph:  614-878-6041  |  800-998-0283

Fax: 614-878-1590


Manufacturer and Supplier of Gaskets and Molded Parts Since 1975   gaskets and seals  custom rubber gaskets

Custom Rubber Gaskets

Rubber gaskets and seals

Manufactured molded products

rubber molded material

Custom gasket quote

Contact Columbus Gasket

Web Menu Graphics by v5.0.0



Custom Gaskets

Our highly skilled, hardworking team can meet and often exceed even the most challenging customer demands. Our lead Hand Cut technicians has over 30 years of hands-on experience doing nothing but hand cuts on a daily basis. That's why Columbus Gasket employs some of the most qualified designers and manufacturing personnel the gasket making industry has to offer. Members of our team are dedicated to ensuring that your custom gasket maintains a secure seal under required application conditions.


ANSI Full Face & Ring Gaskets

Flanges, Gaskets, and Rings are parts used to seal and prevent leakage, absorb vibration, etc. around a pipe or piping fitting.


Die Cut Gasket

Die cut Gaskets seal between two different surfaces, under compression. Columbus Gasket is an expert manufacturer of die cut industrial gaskets from all materials. The die cut industrial gaskets sealing is a result of the compressive forces created by sufficient bolt load, and also works to fill the imperfections on the mating surfaces to be sealed. (ANSI Flange Standards)


Lathe Cut Gasket

Lathe cut rubber gaskets are manufactured from a cylinder of rubber by inserting a metal bar or shaft into the rubber cylinder and cutting the finished dimensions with a knife while the shaft is being turned at a high rate of speed in a lathe type machine.


Extruded Products

Extruded rubbers or other compounds/materials are a product that is pushed through a tooling in a less than solid state to form the desired shape and dimensions that are necessary for the required application. It is often made into assorted strips and channels that run continuously for a predetermined length. These can be hollow or solid with the most common being C, T, P, D, H, E, and U Shaped (see below for examples).



 ● Die-Cut Parts

 ● Injection Mold Splicing
 ● Custom Molded Parts

 ● Waterjet Parts
 ● Custom Extruded Parts

 ● Kiss Cutting
 ● Vulcanizing

 ● Consulting Services
 ● Strip Cutting

 ● Cold Bonding
 ● Steel Rule Die Making

 ● Direct Shipments
 ● Expedited Delivery
 ● Ability to apply or laminate pressure sensitive adhesive (PSA) to most materials




We Gladly Accept:




Molded Parts

Molded parts are a finished product where a liquid or a liquid compound (often rubber) is poured into a form and is allowed to set up to obtain the desired shape. Great for large production jobs where consistencies and high tolerances are required. A very cost effective way to produce large quantities of parts.


Waterjet Cutting

Water-jet cutting is an industrial tool capable of cutting an assortment of materials using a pressure jet of water. Excellent for thicker materials. Allows us to cut materials where high heat sensitivity is an issue. Great for cutting gaskets or materials where tolerances are critical. Able to cut metal(s), granite, tile/tile inlays, glass, plastic, rubber, gasket material(s), felt, sponge

Spiral Wound Gaskets

Spiral Wound gaskets are composed of both a metallic and a filler material. Generally, the gasket has a metal (normally carbon rich or stainless steel) wound outwards in a circular spiral (other shapes are possible) with the filler material (generally a flexible graphite) wound in the same manner but starting from the opposing side. This results in alternating layers of filler and metal. The filler material in these gaskets acts as the sealing element, with the metal providing structural support.


Rubber Injection Mold

Rubber injection molding is a process where a solid piece of rubber is placed into a heated form and heated/cooked for a specific amount of time to join two or more parts together to make a single part or piece. This process is somewhat outdated and there are usually other ways to make parts. However, with smaller quantities the advantage to using this method is we can make fairly large parts without the cost of large mold







1875 Lone Eagle St.

Columbus, Ohio 43228


1722 1st Street NE.

Massillon, Ohio 44646


Local:  614-878-6041

 Toll Free: 800-998-0283

Fax: 614-878-1590

Manufacturer and Supplier of Gaskets and Molded Parts Since 1975

Gasket Fabricators Association      International Association of diecutting and diemaking

Copyright 2017 Columbus Gasket and Supply Company. | 1875 Lone Eagle Street, Columbus, Ohio 43228 | 1722 1st Street NE. Massillon, Ohio 44646
Site Developed by:
Custom Corporate Image, LLC and Createns Web Marketing LLC